> ## Documentation Index > Fetch the complete documentation index at: https://preview.bazel.build/llms.txt > Use this file to discover all available pages before exploring further. # Optimizing Performance When writing rules, the most common performance pitfall is to traverse or copy data that is accumulated from dependencies. When aggregated over the whole build, these operations can easily take O(N^2) time or space. To avoid this, it is crucial to understand how to use depsets effectively. This can be hard to get right, so Bazel also provides a memory profiler that assists you in finding spots where you might have made a mistake. Be warned: The cost of writing an inefficient rule may not be evident until it is in widespread use.

Use depsets

Whenever you are rolling up information from rule dependencies you should use [depsets](/rules/lib/builtins/depset). Only use plain lists or dicts to publish information local to the current rule. A depset represents information as a nested graph which enables sharing. Consider the following graph: ``` C -> B -> A D ---^ ``` Each node publishes a single string. With depsets the data looks like this: ``` a = depset(direct=['a']) b = depset(direct=['b'], transitive=[a]) c = depset(direct=['c'], transitive=[b]) d = depset(direct=['d'], transitive=[b]) ``` Note that each item is only mentioned once. With lists you would get this: ``` a = ['a'] b = ['b', 'a'] c = ['c', 'b', 'a'] d = ['d', 'b', 'a'] ``` Note that in this case `'a'` is mentioned four times! With larger graphs this problem will only get worse. Here is an example of a rule implementation that uses depsets correctly to publish transitive information. Note that it is OK to publish rule-local information using lists if you want since this is not O(N^2). ``` MyProvider = provider() def _impl(ctx): my_things = ctx.attr.things all_things = depset( direct=my_things, transitive=[dep[MyProvider].all_things for dep in ctx.attr.deps] ) ... return [MyProvider( my_things=my_things, # OK, a flat list of rule-local things only all_things=all_things, # OK, a depset containing dependencies )] ``` See the [depset overview](/extending/depsets) page for more information.

Avoid calling `depset.to_list()`

You can coerce a depset to a flat list using [`to_list()`](/rules/lib/builtins/depset#to_list), but doing so usually results in O(N^2) cost. If at all possible, avoid any flattening of depsets except for debugging purposes. A common misconception is that you can freely flatten depsets if you only do it at top-level targets, such as an `_binary` rule, since then the cost is not accumulated over each level of the build graph. But this is *still* O(N^2) when you build a set of targets with overlapping dependencies. This happens when building your tests `//foo/tests/...`, or when importing an IDE project.

Reduce the number of calls to `depset`

Calling `depset` inside a loop is often a mistake. It can lead to depsets with very deep nesting, which perform poorly. For example: ```python theme={null} x = depset() for i in inputs: # Do not do that. x = depset(transitive = [x, i.deps]) ``` This code can be replaced easily. First, collect the transitive depsets and merge them all at once: ```python theme={null} transitive = [] for i in inputs: transitive.append(i.deps) x = depset(transitive = transitive) ``` This can sometimes be reduced using a list comprehension: ```python theme={null} x = depset(transitive = [i.deps for i in inputs]) ```

Use ctx.actions.args() for command lines

When building command lines you should use [ctx.actions.args()](/rules/lib/builtins/Args). This defers expansion of any depsets to the execution phase. Apart from being strictly faster, this will reduce the memory consumption of your rules -- sometimes by 90% or more. Here are some tricks: * Pass depsets and lists directly as arguments, instead of flattening them yourself. They will get expanded by `ctx.actions.args()` for you. If you need any transformations on the depset contents, look at [ctx.actions.args#add](/rules/lib/builtins/Args#add) to see if anything fits the bill. * Are you passing `File#path` as arguments? No need. Any [File](/rules/lib/builtins/File) is automatically turned into its [path](/rules/lib/builtins/File#path), deferred to expansion time. * Avoid constructing strings by concatenating them together. The best string argument is a constant as its memory will be shared between all instances of your rule. * If the args are too long for the command line an `ctx.actions.args()` object can be conditionally or unconditionally written to a param file using [`ctx.actions.args#use_param_file`](/rules/lib/builtins/Args#use_param_file). This is done behind the scenes when the action is executed. If you need to explicitly control the params file you can write it manually using [`ctx.actions.write`](/rules/lib/builtins/actions#write). Example: ``` def _impl(ctx): ... args = ctx.actions.args() file = ctx.declare_file(...) files = depset(...) # Bad, constructs a full string "--foo=" for each rule instance args.add("--foo=" + file.path) # Good, shares "--foo" among all rule instances, and defers file.path to later # It will however pass ["--foo", ] to the action command line, # instead of ["--foo="] args.add("--foo", file) # Use format if you prefer ["--foo="] to ["--foo", ] args.add(file, format="--foo=%s") # Bad, makes a giant string of a whole depset args.add(" ".join(["-I%s" % file.short_path for file in files.to_list()]) # Good, only stores a reference to the depset args.add_all(files, format_each="-I%s", map_each=_to_short_path) # Function passed to map_each above def _to_short_path(f): return f.short_path ```

Transitive action inputs should be depsets

When building an action using [ctx.actions.run](/rules/lib/builtins/actions#run), do not forget that the `inputs` field accepts a depset. Use this whenever inputs are collected from dependencies transitively. ``` inputs = depset(...) ctx.actions.run( inputs = inputs, # Do *not* turn inputs into a list ... ) ```

Hanging

If Bazel appears to be hung, you can hit Ctrl-\\ or send Bazel a `SIGQUIT` signal (`kill -3 $(bazel info server_pid)`) to get a thread dump in the file `$(bazel info output_base)/server/jvm.out`. Since you may not be able to run `bazel info` if bazel is hung, the `output_base` directory is usually the parent of the `bazel-` symlink in your workspace directory.

Performance profiling

The [JSON trace profile](/advanced/performance/json-trace-profile) can be very useful to quickly understand what Bazel spent time on during the invocation. The [`--experimental_command_profile`](https://bazel.build/reference/command-line-reference#flag--experimental_command_profile) flag may be used to capture Java Flight Recorder profiles of various kinds (cpu time, wall time, memory allocations and lock contention). The [`--starlark_cpu_profile`](https://bazel.build/reference/command-line-reference#flag--starlark_cpu_profile) flag may be used to write a pprof profile of CPU usage by all Starlark threads.

Memory profiling

Bazel comes with a built-in memory profiler that can help you check your rule’s memory use. If there is a problem you can dump the heap to find the exact line of code that is causing the problem.

Enabling memory tracking

You must pass these two startup flags to *every* Bazel invocation: ``` STARTUP_FLAGS=\ --host_jvm_args=-javaagent: \

--host_jvm_args=-DRULE_MEMORY_TRACKER=1 ``` Note: You can download the allocation instrumenter jar file from [Maven Central Repository][allocation-instrumenter-link]. [allocation-instrumenter-link]: https://repo1.maven.org/maven2/com/google/code/java-allocation-instrumenter/java-allocation-instrumenter/3.3.4 These start the server in memory tracking mode. If you forget these for even one Bazel invocation the server will restart and you will have to start over.

Using the Memory Tracker

As an example, look at the target `foo` and see what it does. To only run the analysis and not run the build execution phase, add the `--nobuild` flag. ``` $ bazel $(STARTUP_FLAGS) build --nobuild //foo:foo ``` Next, see how much memory the whole Bazel instance consumes: ``` $ bazel $(STARTUP_FLAGS) info used-heap-size-after-gc > 2594MB ``` Break it down by rule class by using `bazel dump --rules`: ``` $ bazel $(STARTUP_FLAGS) dump --rules > RULE COUNT ACTIONS BYTES EACH genrule 33,762 33,801 291,538,824 8,635 config_setting 25,374 0 24,897,336 981 filegroup 25,369 25,369 97,496,272 3,843 cc_library 5,372 73,235 182,214,456 33,919 proto_library 4,140 110,409 186,776,864 45,115 android_library 2,621 36,921 218,504,848 83,366 java_library 2,371 12,459 38,841,000 16,381 _gen_source 719 2,157 9,195,312 12,789 _check_proto_library_deps 719 668 1,835,288 2,552 ... (more output) ``` Look at where the memory is going by producing a `pprof` file using `bazel dump --skylark_memory`: ``` $ bazel $(STARTUP_FLAGS) dump --skylark_memory=$HOME/prof.gz > Dumping Starlark heap to: /usr/local/google/home/$USER/prof.gz ``` Use the `pprof` tool to investigate the heap. A good starting point is getting a flame graph by using `pprof -flame $HOME/prof.gz`. Get `pprof` from [https://github.com/google/pprof](https://github.com/google/pprof). Get a text dump of the hottest call sites annotated with lines: ``` $ pprof -text -lines $HOME/prof.gz > flat flat% sum% cum cum% 146.11MB 19.64% 19.64% 146.11MB 19.64% android_library :-1 113.02MB 15.19% 34.83% 113.02MB 15.19% genrule :-1 74.11MB 9.96% 44.80% 74.11MB 9.96% glob :-1 55.98MB 7.53% 52.32% 55.98MB 7.53% filegroup :-1 53.44MB 7.18% 59.51% 53.44MB 7.18% sh_test :-1 26.55MB 3.57% 63.07% 26.55MB 3.57% _generate_foo_files /foo/tc/tc.bzl:491 26.01MB 3.50% 66.57% 26.01MB 3.50% _build_foo_impl /foo/build_test.bzl:78 22.01MB 2.96% 69.53% 22.01MB 2.96% _build_foo_impl /foo/build_test.bzl:73 ... (more output) ```